OVERVIEW
The Repiper Step by Step system is a patented CIPP technology made to completely rehabilitate drain and sewer systems inside and near buildings. 100% watertight with high quality and structural materials. For over 20 years we have manufactured, used and developed our patented products. In REAL scenarios. We are established in the US to support existing and new American installers.
START PACKAGE
The start package includes everything you need to get started with the Repiper step-by-step system. It doesn’t matter if you are already lining pipes or just getting started.
Be ready for it all and line your tee and wye fittings. Includes:
• Fixtures of sizes 6” down to 2”.
• Every size has 1x back up.
• A total of 16x fixtures.
• PJS Liners 5x of each size.
• A total of 40 PJS Liners.
A Repiper exclusive method and tool to invert, inflate and steam liners below 30ft. Waste no time by inflating and steaming your liner from the end towards your access point. Includes:
• 1x Repiper Cannon 2”-6”
• 2x 2” Repiper Backshooter
• 2x 3” Repiper Backshooter
• 2x 4” Repiper Backshooter
• 2x 6” Repiper Backshooter
The Repiper packers are the smoothest and most flexible bladders on the market. With extreme durability and non-aging material, our packers will help you install liners remotely in difficult places. Includes:
• 2x 10ft 3” Packer
• 2x 10ft 4” Packer
• 2x 10ft 6” Packer
Our high-quality, two-part EX epoxy resin comes portioned in metal cans and is a breeze to work with, unmatched in structural and adhesive properties. Hot water, steam or ambient. Includes:
• 10x Repiper Epoxy Base 30lbs Cans
• 7x Repiper EX2-2 Hardener 7.7lbs Cans
• 3x Repiper EX1-2 Hardener 7.7lbs Cans
The Repiper liners are of the highest quality felt and coating, made strong enough to be steam-cured without a calibration tube, viable for both inversion and pull in place. Includes:
• 1x Roll of Repiper FlexMax 2/3″ 328ft 4,5mm
• 1x Roll of Repiper FlexMax 3/4″ 328ft 4,5mm
• 1x Roll of Repiper FlexMax 3″ 328ft 4,5mm
• 1x Roll of Repiper FlexMax 4/6″ 328ft 4,5mm
• 1x Roll of Repiper S Liner 4″ 328ft 5mm
• 1x Roll of Repiper S Liner 6″ 328ft 5mm
All the necessary accessories to be successful with your Repiper step-by-step system. Includes:
• 2x Repiper Steam Units 120V
• 3x 30ft Repiper Hydraulic Push hoses (Steam rated)
• 3x 15ft Repiper Hydraulic Push hoses (Steam rated)
• 1x Toolbox with all air tools needed such as regulators, ejectors, valves, plugs, retrieving hooks, hose clamps, adapters, hole punches and more.
All the necessary accessories to be successful with your Repiper step-by-step system. Includes:
• 2x Repiper Steam Units 120V
• 3x 30ft Repiper Hydraulic Push hoses (Steam rated)
• 3x 15ft Repiper Hydraulic Push hoses (Steam rated)
• 1x Toolbox with all air tools needed such as regulators, ejectors, valves, plugs, retrieving hooks, hose clamps, adapters, hole punches and more.
With the start package, four days of deep and detailed training is included at our location as well as continuous live support. Repiper’s trainers are also available for onsite training at your location. When we say “For installers, by installers” – We mean it. You will talk to a technical expert when you call us.
ADVANTAGES OF REPIPER
The Repiper Step by Step system is a patented CIPP technology made to completely rehabilitate and seal every square inch of drain and sewer systems inside and near buildings. 100% watertight with high quality and structural materials.
History has proven that traditional methods that are being used for waterproofing outside, are not applicable inside buildings where access is limited, diameter is tighter and pipe systems are more intricate. But by using Repiper’s watertight CIPP (Cured-in-Place-Pipe) solution, you will be able to structurally rehabilitate and seal every square inch of drains and sewers inside the buildings.
Low risk installations
Steam accelerated installs
Affordable set up costs
Minimal robotic procedures
Scalable Process
Patented fixtures & bladders of highest quality
“The Pipe lining Company recently completed a project using the Repiper system, with the guidance of Jesper Stockfors. Throughout our time working with Jesper and the Repiper system, our company experienced a flawless installation. We specifically worked with the Repiper’s Tee Connections (fittings).”
”Before, it was impossible to effectively tackle the lining of vertical stack pipes that were failing in condominium and apartment buildings due to the risk of leakage. All that changed when we learned about the Tee liners made by Repiper. By using the Tee liner we are able to leave a seamless and watertight connection behind ”
“With the introduction of this new technology, the Repiper team were able to line the fittings that had previously been unreachable. Your expert technical assistance led a team from PipeLiningComapany.com to install the liners. With your guidance, the team created an access point where you surgically installed multiple t-liners. The finished product left a seamless lined pipe from beginning to end which will carry the uninterrupted flow to the city. We can not express how grateful we are to the Repiper team.”
