OUR SOLUTIONS
COMPLETE SOLUTIONS FOR THE RENOVATION OF SEWER SYSTEMS IN BUILDINGS
The renovation of a building’s sewer system has traditionally involved extreme inconvenience for its tenants. The building must either be evacuated or the tenants must live with noise and dust while the work is proceeding.
These kinds of workplaces often involve environmental hazards, such as asbestos and lead. However, many of these issues can be completely avoided by renovating the original pipes from inside the building instead of replacing them.
When using the patented Repiper® tools and the step-by-step method neither the floors nor the walls have to be dismantled, minimizing disruption. The entire process only takes a few days and is carried out at a fraction of the price compared to traditional methods.
The final CIPP product has a certified service life of at least 40 years and the result is a new tightly sealed and self-supporting pipeline system within the old system, with no seams risking water infiltration between the host pipe and the CIPP liner!
OUR ADVANTAGES
Key advantages compared to traditional methods
Affordable setup costs
Low-risk mistakes are manageable & affordable
Less disruption to tenants
Less waste
Same life expectancy as a new pipe
STEP 1
LINING A
VERTICAL SEWER STACK
Starting from the bottom, a sectional liner, impregnated with a thermo-setting plastic, is installed in the stack using air pressure and steam. The liner is placed below the first horizontal tie in. Once the liner is in place and the plastic sets, this will result in a smooth standalone pipe section in the old section, similar to the start of building a new sewer stack.
STEP 2
LINING A
BRANCH JOINT
Pipe joints are one of the most vulnerable points of a sewer system are often the cause of leakages. By using a T-shaped liner and a patented insertion tool the branch pipe is reinforced and also overlaps, the original vertical liner, leaving a seamless connection between the horizontal and vertical pipes. There are no lips the flow of water.
STEP 3
LINING A
BRANCH LINE
A branch line is renovated by combining the techniques of soil stack lining and branch pipe lining. The dimensions of the pipe in a branch line are normally smaller than in the rest of the sewage system. Thus, lining the branch line calls for careful planning and good craftsmanship to ensure a high quality finish. Repipers Red hot backshooter is an excellent tool that makes it convenient and cost effective to line short and tight sections of pipe, overlapping the T-shaped liner from the vertical stack.
STEP 4
LINING A
MAIN DRAIN
Once the building’s sewage system has been renovated the work is completed by lining the main drain, which runs through the building to the city’s sewage network. Main drains are often affected by ground settlement, dislocations and the encroachment of tree roots. This leads to the leakage of wastewater into the groundwater unless properly maintained. Repiper possesses considerable knowledge and experience to help you and your customers streamline this process. It should not be the same costly process street lining, on a manhole-to-manhole basis.
OUR TOOLS
WE PROVIDE YOU WITH THE TOOLS TO GIVE YOUR CUSTOMERS BETTER OPTIONS
The renovation of sewage pipes in buildings is an expanding business. Increasingly more property owners and housing cooperatives are discovering the benefits of renovating their outdated sewage pipes instead of replacing them, saving both time and money.
If you are looking to expand your business and would like a cost-effective alternative to traditional methods, working with Repiper is by far the
most time-effective and secure way to the successful and profitable renovation of sewer systems in buildings.
The method is based on the knowledge accumulated by the inventors during 40 years of working with sewer systems and is a profitable alternative to traditional methods, for both the license holder and the end customer.
OUR AGREEMENT
WE HELP YOU EVERY STEP OF THE WAY
A Repiper agreement contains the following:
- The right to use Repiper in a specific geographical market
- Use of patented special tools and a Repiper-certified end product
- Technical support related to installation and the method
- Education and practical training to the extent needed to carry out safe and profitable installations
- Equipment and certified materials, specially designed for renovating sewer pipes in buildings
- Continuous technological development
OUR TRAINING
EDUCATION
Repiper offers in-depth on-site training from its experienced staff, as well as project planning and education. Not only do we have extensive knowledge of our products, we also know how to use our system in the field to carry out real work while training your team to achieve success.
On-site training is important for covering a lot of ground, although we know the difference between demoing and working.
As a Repiper System Reseller/ RD contractor you will be a part of a worldwide community where we exchange knowledge and lessons learned. You will also get access to educational “how-to” videos and material available on our website. These are available to you at any time.
