What I like about Repiper is that it gives us a really good way to fully rehabilitate a line, not just line the main and call it done. When we install T-liners at the branch connections, we’re also taking care of the throat of the fitting, which is a big deal. That gives you a more complete system and gives the next plumber something solid to tie into without having to cut back into the liner you just installed.
The material itself is thick, easy to work with, and easy to wet out. The resin is simple to use, and overall the material just feels like a more premium product.
I also really like the bladders and fixture holders. They’re reusable, easy to work with, and interchangeable, which makes things a lot simpler in the field. With some pull-in-place systems, you can end up replacing bladders more often, cutting them out, or having to make repairs. The Repiper bladders and fixture holders seem to hold up for a much longer time, which saves both time and money.
Another big advantage is the cure time. We use steam to help accelerate the curing process, and the steam box setup itself is very simple and user-friendly. It’s easy to set up, easy to operate, and as long as the equipment is properly maintained, we really haven’t had issues with it. That reliability matters when you’re trying to keep production moving from one installation to the next.
Depending on the distance and the setup, you can sometimes be in and out of an installation in 30 minutes to an hour. When you’re doing multiple installations in a day, that makes a big difference.
One of the things I like most is how much control you have during the installation. We normally work anywhere from 2-inch up to 8-inch pipe, and hitting an exact mark can be difficult with other lining methods. With Repiper, the material has enough stiffness that you can actually see what you’re doing with the camera while you’re pushing it through the line. If you go a little too far, you can pull it back and make your adjustment before everything cures.
You also don’t have to depend as much on having another camera sitting in the main just to make sure you hit your mark. The material holds its shape well enough that you can see the bends, make adjustments, and if there’s an area you don’t like, you still have time to work with the bladder and get it where you want it before it sets.
Overall, I just think it’s a very simple and effective system. The material is easy to use, the bladders and fixture holders hold up well, the steam equipment is user-friendly, and the whole installation process makes sense. The faster curing time also lets us move from one installation to the next without wasting a lot of time.
At the end of the day, I look at Repiper as a more complete and premium long-term solution. It’s easier to work with, easier to adjust in the field, and it gives us a finished product that I feel comfortable putting my name on.


